# Connencting to Clean air

**URL:** <https://community.oscium.com/t/connencting-to-clean-air/1499>\
**Category:** Uncategorized\
**Created:** [December 4, 2020, 2:13pm UTC](https://community.oscium.com/t/connencting-to-clean-air/1499 "2020-12-04T14:13:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![calb](https://avatars.discourse-cdn.com/v4/letter/c/b2d939/32.png) [@calb](https://community.oscium.com/u/calb)\
**Post date:** [December 4, 2020, 2:13pm UTC](https://community.oscium.com/t/connencting-to-clean-air/1499/1 "2020-12-04T14:13:48Z")

</div>

I’ve connected to a Clean Air AP in Monitor mode, I was expecting to be able to see both 2.4Gh and 5Ghz at the same time in the waterfall.

Is that not the case?

---

<div class="post-metadata">

**Author:** ![casey](https://yyz1.discourse-cdn.com/flex047/user_avatar/community.oscium.com/casey/32/68_2.png) [@casey](https://community.oscium.com/u/casey)\
**Post date:** [December 8, 2020, 8:04pm UTC](https://community.oscium.com/t/connencting-to-clean-air/1499/2 "2020-12-08T20:04:27Z")

</div>

Hi [calb](https://community.oscium.com/u/calb),

> I’ve connected to a Clean Air AP in Monitor mode, I was expecting to be able to see both 2.4Gh and 5Ghz at the same time in the waterfall.

I believe this depends on the model of Cisco AP you are using. The 2800/3800 series allows for a Monitor Role which sweeps the entirety of both bands while the 5 GHz radio serves clients. Chanalyzer can display spectrum data for the entire 2.4 and 5 GHz bands. You can find out more about this in [this article here](https://support.metageek.com/hc/en-us/articles/200591105-Connecting-Chanalyzer-to-a-Cisco-CleanAir-Access-Point).