# Security Mismatch

**URL:** <https://community.oscium.com/t/security-mismatch/226>\
**Category:** Network Observations\
**Created:** [December 30, 2019, 8:38pm UTC](https://community.oscium.com/t/security-mismatch/226 "2019-12-30T20:38:03Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![ryan](https://yyz1.discourse-cdn.com/flex047/user_avatar/community.oscium.com/ryan/32/116_2.png) [@ryan](https://community.oscium.com/u/ryan)\
**Post date:** [December 30, 2019, 8:38pm UTC](https://community.oscium.com/t/security-mismatch/226/1 "2019-12-30T20:38:03Z")

</div>

This observation is shown when the access points do not all have the same security settings. We recommend configuring ALL access points to use WPA2 Security.

---

<div class="post-metadata">

**Author:** ![stu.mccluskey](https://avatars.discourse-cdn.com/v4/letter/s/5fc32e/32.png) [@stu.mccluskey](https://community.oscium.com/u/stu.mccluskey)\
**Post date:** [December 8, 2020, 5:50am UTC](https://community.oscium.com/t/security-mismatch/226/2 "2020-12-08T05:50:23Z")

</div>

Does this mean for all access points with the same SSIDs or all access points shown within the scan? As you would expect this for all access points within the scan if they had different owners. This would only be useful if it were comparing devices with the same SSID.

---

<div class="post-metadata">

**Author:** ![casey](https://yyz1.discourse-cdn.com/flex047/user_avatar/community.oscium.com/casey/32/68_2.png) [@casey](https://community.oscium.com/u/casey)\
**Post date:** [December 8, 2020, 8:57pm UTC](https://community.oscium.com/t/security-mismatch/226/3 "2020-12-08T20:57:58Z")

</div>

Hi [stu.mccluskey](https://community.oscium.com/u/stu.mccluskey),

inSSIDer should only display observations when an SSID is starred, therefore it will only look at the APs under the starred SSID.

If you notice something otherwise, please let us know!

---

<div class="post-metadata">

**Author:** ![sharonkay.mt](https://avatars.discourse-cdn.com/v4/letter/s/ea5d25/32.png) [@sharonkay.mt](https://community.oscium.com/u/sharonkay.mt)\
**Post date:** [January 10, 2021, 1:12am UTC](https://community.oscium.com/t/security-mismatch/226/4 "2021-01-10T01:12:21Z")

</div>

Can you help and explain some stuff. I just got inSSIDer today. I don’t know much about all of this stuff. My Wifi modem/router was set to WPA-WPA2 so I changed it to WPA2. Then inSSIDer said "we strongly recommend you configure all APs to use the same security setting such as WPA2. I do not know what that means. What APs? I only have one modem. I did get a Wifi extender from Centurylink. Do they mean that? My cellphone is still set to WPA-WPA2. Do I change that somewhere in the phone? I really don’t know what to do. I just expected to change it to WPA2 in the modem and be good. Thanks.

---

<div class="post-metadata">

**Author:** ![casey](https://yyz1.discourse-cdn.com/flex047/user_avatar/community.oscium.com/casey/32/68_2.png) [@casey](https://community.oscium.com/u/casey)\
**Post date:** [January 11, 2021, 9:04pm UTC](https://community.oscium.com/t/security-mismatch/226/5 "2021-01-11T21:04:37Z")

</div>

Hi [sharonkay.mt](https://community.oscium.com/u/sharonkay.mt),

> What APs? I only have one modem. I did get a Wifi extender from Centurylink. Do they mean that?

Yes, since your WiFi extender is sharing the same SSID as your modem, inSSIDer thinks this is another AP. Are you able to change the security settings on the extender to WPA2 only? Some extenders might not let you configure this, so no worries if not.

[Here](https://www.speedguide.net/faq/wpa2-vs-wpa2wpa-mixed-mode-security-436) is some more info on the difference between WPA-WPA2 versus WPA2 only and why it’s more advantageous to keep everything WPA2 only.

> My cellphone is still set to WPA-WPA2. Do I change that somewhere in the phone?

Since your cell phone is a client on the network then you do not need to make any changes in the phone settings. It _should_ be able to connect to both a WPA2-only and a WPA/WPA2-mixed network.

If you have any other questions, please send over a .pcap file from **File \> Export Summary** to [support@metageek.com](mailto:support@metageek.com) so that our team can take a closer look!

---

<div class="post-metadata">

**Author:** ![sharonkay.mt](https://avatars.discourse-cdn.com/v4/letter/s/ea5d25/32.png) [@sharonkay.mt](https://community.oscium.com/u/sharonkay.mt)\
**Post date:** [January 13, 2021, 4:06am UTC](https://community.oscium.com/t/security-mismatch/226/6 "2021-01-13T04:06:33Z")

</div>

Thank you. My extender is out of whack and they are sending a new one. Sounds like I do not need to worry about it over lapping. I will see if I can set it to WPA2 if I can ever get them to work. I really appreciate your response.

---

<div class="post-metadata">

**Author:** ![sharonkay.mt](https://avatars.discourse-cdn.com/v4/letter/s/ea5d25/32.png) [@sharonkay.mt](https://community.oscium.com/u/sharonkay.mt)\
**Post date:** [January 15, 2021, 7:34pm UTC](https://community.oscium.com/t/security-mismatch/226/7 "2021-01-15T19:34:30Z")

</div>

I still don’t understand. inSSIDer is nice but not helpful if you don’t even know what the comments are or how to fix them. I got this. ![image](https://canada1.discourse-cdn.com/flex047/uploads/metageek1/original/1X/1aa92357b2f924f6635b9ff5016c36714a95a037.png) I only have one modem and no other access points (maybe- what are those exactly?). I will look to see if I can send the .pcap file.

---

<div class="post-metadata">

**Author:** ![casey](https://yyz1.discourse-cdn.com/flex047/user_avatar/community.oscium.com/casey/32/68_2.png) [@casey](https://community.oscium.com/u/casey)\
**Post date:** [January 15, 2021, 10:59pm UTC](https://community.oscium.com/t/security-mismatch/226/8 "2021-01-15T22:59:19Z")

</div>

Hi Sharon,

This observation simply means that one of your neighbors is deploying a WiFi network that is interfering with yours. The network name is `2boysandamom2.4` and at -67 dBm, it is close enough to affect your WiFi.

 ![test](https://canada1.discourse-cdn.com/flex047/uploads/metageek1/original/1X/877a0cfcaf8c7d359cdf4ec5cbb88e4cd20e7085.png)

There is really not much you can do other than ask the owner of this network to move their network to channel 1, 6, or 11, as recommended [here](https://www.metageek.com/training/resources/why-channels-1-6-11.html). It might be worth bringing a plate of cookies. 🙂

Please let me know if you have any other questions.

---

<div class="post-metadata">

**Author:** ![btsheeran](https://yyz1.discourse-cdn.com/flex047/user_avatar/community.oscium.com/btsheeran/32/1056_2.png) [@btsheeran](https://community.oscium.com/u/btsheeran)\
**Post date:** [February 11, 2025, 6:02am UTC](https://community.oscium.com/t/security-mismatch/226/9 "2025-02-11T06:02:47Z")

</div>

I am using my iPhone’s hotspot yet i am getting an error message of a security mismatch. It shows 2 different access points with different MAC addresses at 5ghz. Then there is 1 access point at 2ghz. How in the world can i stop this now? I had no idea it broadcasted both a 2.5 and a 5ghz i figured they were a single MAC. However my home router appears to have a “hidden access point” same channel, same band, very close mac address. I have had a guy hacking me for a long time and honestly, I have pretty much given up. There really is nowhere to get help when someone digitally invades your life. Have you any ideas about the iPhone thing? 3 access points for a hotspot is insane IMO. Thanks

 ![Screenshot 2025-02-11 010205](https://canada1.discourse-cdn.com/flex047/uploads/metageek1/original/2X/a/a795db2903327a79fa4be1ae927bf2bbcefef4ef.png)
